GPCA Bronco GP-Star Tie-Down Bolt Set
GPCA Bronco GP-Star Tie-Down Bolt Set
573 in stock
Couldn't load pickup availability
Is this right for your vehicle?
✅ 2021+ Ford Bronco hardtop, 2-door or 4-door: you're in the right place
❌ Bronco soft top: the soft top covers the tub edge, so the tub-edge packs do not fit (GP-Star can still go on the C-pillar mount)
❌ Bronco Sport: not compatible
➡️ Jeep Wrangler or Gladiator: see GP-Star for Jeep
Bolt it on with a statement
Upgrading the Ford Bronco Torx screws to GP-Star quick-release thumbscrews makes hardtop removal or installation a breeze. Thumbscrews are also designed for mounting the GPCA Tie-Down D-rings under a hardtop. A galvanized coated metal screw with an M8-1.25 thread, topped with an Engineered ABS star head with reinforced Nylon, built for years of use.
![]()
EASY TOP / GPCA COVER mount and demount
NO TOOLS REQUIRED: friendly thumbscrews make hardtop removal simple. Fasten in seconds to the 8 factory tub-edge attachment points.
NO LOOSE PARTS: fasteners store in the upper deck holes when topless.
![]()
Which pack do you need?
8 Pack Bronco: the 8 tub-edge bolts. Best starting point.
8 Pack Bronco D-Ring: the 8 tub-edge bolts plus 8 D-rings.
8+2 Pack + 8 D-ring for 2021–2023 models: adds 2 GP-Stars on top (one on each side) that secure the front edge of the rear shell.
8+4 Pack + 8 D-ring for 2024–2026 models: Ford added a second top bolt on each side, so 4 GP-Stars on top.
8 D-Ring: the 8 D-rings only.
![]()
GP-Star install video (shown on a Jeep Wrangler JK):
Product Specs
| Thread | M8-1.25 × 25 mm |
|---|---|
| Material | Galvanized coated metal screw; Engineered ABS with reinforced Nylon star head |
| Head style | Star, about 1.5 in (38 mm) across, with a recessed badge area on top for the included star decal |
| Fitment | 2021+ Ford Bronco hardtop, 2-door and 4-door (not soft top, not Bronco Sport) |
| Hardtop direct replacement | Yes, replaces the factory Bronco hardtop bolts |
| Doubles as tie-down | Yes |
| Compatible with | GPCA Bronco Cargo Cover and the Bronco Anchor PRO (same M8 thread) |
| Quantity per set | 8 tub-edge bolts (matches the Bronco's 8 tub-edge mounting points) + 2 or 4 top forward bolts in the 8+2 / 8+4 packs |
| Tools required | None once installed. First removal of the factory bolts: the T50 Torx Plus bit from the Bronco tool kit |
| Install time | About 5 minutes for all bolts |
| Torque | 158 in-lb each. Hand-tighten until snug with the rubber washer first, and do not over-force. Snug it like a bike seat post, don't crank it. |
| Warranty | 1-year limited |
What’s included: 8 M8 × 25 mm thumbscrews (10 or 12 in the 8+2 / 8+4 packs), rubber-backing washers, galvanized nuts and 1 star decal per bolt. D-rings are added in the D-ring packs.

Installations and more FAQ: GPCA Tie-Down Anchor & Bolt FAQ
Related: Bronco Tie-Down Anchor PRO · Tie-Down D-Rings · Bronco Cargo Cover
Product images are for illustrative purposes only. Manufacturers may make minor updates to products from time to time, including design changes, color variations, added features, or packaging updates, without prior notice. The item you receive may vary slightly from the image shown. These variations do not constitute grounds for return or refund.
Share
