Description
For storing Snow skis, ski poles , and water skis (Holds 4)
This device is made of 3/8" inch Wisa-birch plywood (premium cabinet grade/7 layers) and a 1 inch thick by 1 1/2' wide mount plate. Painted 3” mounting screws are provided for installation. This device is painted with a satin lacquer finish. The finish is extremely durable and attractive.
Installation: Locate the center of one stud using a stud finder: 1) Vertically Hung Devices: drive the top fastener (included with purchase) into the center of the stud , place a level on the device, and drive the bottom fastener into the stud. 2) Horizontally Hung Devices (Baseball organizers are predrilled on 16" centers): Find the center of first stud and drive the fastener through the device into the stud (do not tighten fully until the other fastener location is determined). Since virtually all studs are set on 16" centers, measure over (16"/32"/48" depending on desired distance between devices - Skateboards - 16", Snowboards - 32", Snow Skis - 32" etc...) from the first fastener, level the device using a pocket level, and drive the screw (since some studs may be out of place, you may want to verify the second stud location using a small nail or stud finder). Once you have driven the second fastener, go back and finish tightening the first fastener.
THIS ITEM SHIPS DIRECT. NOT AVAILABLE FOR IN STORE PICK UP.